Industrial Forklifts

CAT 3K (Industrial)

Caterpillar 5K Industrial

S P E C I F I C A T I O N S
CHARACTERISTICS
Capacity at Rated Load Center 3000 lbs (1500 kg)
Capacity at Load Center-Distance 24 in (500 mm)
Power LP Gas
Tire Type Cushion
Wheels (x = driven) Number, Front / Rear 2x / 2
DIMENSIONS
Lift - Maximum Fork Height with Rated Load 162 in (4120 mm)
Lift with Standard Two-Stage Mast - Maximum Fork Height (Top of Forks) 131 in (3345 mm)
Lift with Standard Two-Stage Mast - Free Fork Height 4.5 in (115 mm)
Forks - Thickness x Length x Width 1.4 in x 42 in x 4 in (35 mm x 1070 mm x 100 mm)
Fork Spacing - Out-To-Out Minimum / Maximum 7.85 in / 32.25 in (200 mm / 820 mm)
Tilt - Forward / Backward

5 degrees / 10 degrees
Length to Fork Face

82.0 in (2085 mm)
Width - with Standard Tires 38.2 in (970 mm)
Width - with Standard Tires, Wide-Stance 39.2 in (995 mm)
Width - with Standard Tires, Wide-Axle N/A (N/A)
Height - Mast Lowered 82.9 in (2105 mm)
Height - Seat Height 43.3 in (1100 mm)
Height - To Top of Overhead Guard 81.1 in (2060 mm)
Height - Mast Extended 179.2 in (4550 mm)
Minimum Outside Turning Radius 70.0 in (1777 mm)
Load Moment Constant 15.3 in (390 mm)
Minimum Aisle - 90 Degree Stack - Zero Clearance without Load 85.2 in (2165 mm)
PERFORMANCE
Speeds - Travel Speed Loaded / Empty 9.8 mph / 10.2 mph (15.8 km/h / 16.4 km/h)
Speeds - Lift Speed Loaded / Empty 121 fpm / 125 fpm (617 mm/s / 633 mm/s)
Speeds - Lowering Speed Loaded / Empty 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar Pull - Loaded at 1 mph (1.6 km) 3760 lbs (16,715 N)
Drawbar Pull - Loaded Maximum 4245 lbs (18,880 N)
Gradeability - Loaded at 1 mph (1.6 km) 37%
Gradeability - Maximum Loaded / Empty 43% / 20%
WEIGHT
Empty 6067 lbs (2752 kg)
Axle Load - Without Load Front / Rear 2315 lbs / 3752 lbs (1050 kg / 1702 kg)
Axle Load - With Front Load 7831 lbs (3552 kg)
CHASSIS
Tire Size - Front, Standard 18 in x 6 in x 12 1/8 in
Tire Size - Rear 14 in x 5 in x 10 in
Wheelbase 46.9 in (1190 mm)
Tread Width - Front, Standard Tires 32.2 in (820 mm)
Tread Width - Front, Wide-Stance Tires 33.2 in (845 mm)
Tread Width - Rear, Standard Tires 31.8 in (810 mm)
Ground Clearance - At Lowest Point of Mast 2.9 in (75 mm)
Ground Clearance - At Center of Wheelbase 4.5 in (118 mm)
Brakes - Service Foot - Hydraulic
Brakes - Parking Hand - Mechanical
POWER TRAIN
Engine - Model K21
Engine - Continuous Output (S.A.E. Gross) 52 HP (38.7 kW)
Engine - Continuous Output (S.A.E. Gross) at rpm 2400
Engine - Maximum Torque (S.A.E. Gross) 119 lb-ft (161 Nm/rpm)
Engine - Maximum Torque (S.A.E. Gross) at rpm 2000
Engine - Cylinder Displacement 126 cu in (2065 L)
Transmission - Type Powershift
Transmission - Number of Speeds Forward / Reverse 1 / 1
Battery 12 volts
HYDRAULICS
Relief Pressure - For Attachments at Auxiliary Value 2250 psi (158 kg/cm2)
Hydraulic Flow - For Attachments at Auxiliary Value 19 gpm (72 lpm)

Caterpillar 5K Industrial Dimensions Images and text provided by
Caterpillar

 

CAT 5K (Industrial)

Caterpillar 5K Industrial

S P E C I F I C A T I O N S
CHARACTERISTICS
Capacity at Rated Load Center 5000 lbs (2500 kg)
Capacity at Load Center-Distance 24 in (500 mm)
Power Gas / LP Gas
Tire Type Cushion
Wheels (x = driven) Number, Front / Rear 2x / 2
DIMENSIONS
Lift - Maximum Fork Height with Rated Load 170 in (4320 mm)
Lift with Standard Two-Stage Mast - Maximum Fork Height (Top of Forks) 131 in (3345 mm)
Lift with Standard Two-Stage Mast - Free Fork Height 5.3 in (135 mm)
Forks - Thickness x Length x Width 1.6 in x 42 in x 3.9 in (45 mm x 1070 mm x 100 mm)
Fork Spacing - Out-To-Out Minimum / Maximum 7.8 in / 36 in (200 mm / 920 mm)
Tilt - Forward / Backward 5 degrees / 9 degrees
Length to Fork Face

93.0 in (2360 mm)
Width - with Standard Tires 42.0 in (1065 mm)
Width - with Standard Tires, Wide-Stance 44.5 in (1130 mm)
Width - with Standard Tires, Wide-Axle N/A (N/A)
Height - Mast Lowered 83.5 in (2110 mm)
Height - Seat Height 43.0 in (1090 mm)
Height - To Top of Overhead Guard 82.0 in (2075 mm)
Height - Mast Extended 180 in (4570 mm)
Minimum Outside Turning Radius 79.5 in (2020 mm)
Load Moment Constant 16.5 in (420 mm)
Minimum Aisle - 90 Degree Stack - Zero Clearance without Load 96.0 in (2440 mm)
PERFORMANCE
Speeds - Travel Speed Loaded / Empty 11.0 mph / 11.5 mph (17.5 km/h / 18.0 km/h)
Speeds - Lift Speed Loaded / Empty 125 fpm / 130 fpm (640 mm/s / 650 mm/s)
Speeds - Lowering Speed Loaded / Empty 99 fpm / 99 fpm (500 mm/s / 500 mm/s)
Drawbar Pull - Loaded at 1 mph (1.6 km) 4325 lbs (19,200 N)
Drawbar Pull - Loaded Maximum 4850 lbs (21,600 N)
Gradeability - Loaded at 1 mph (1.6 km) 34.8 %
Gradeability - Maximum Loaded / Empty 39.6% / 22.8%
WEIGHT
Empty 8157 lbs (3700 kg)
Axle Load - Without Load Front / Rear 2833 lbs / 5324 lbs (1285 kg / 2415 kg)
Axle Load - With Front Load 11,488 lbs (5211 kg)
CHASSIS
Tire Size - Front, Standard 21 in x 7 in x 15 in
Tire Size - Rear 16 in x 6 in x 10.5 in
Wheelbase 55.0 in (1400 mm)
Tread Width - Front, Standard Tires 35.0 in (886.4 mm)
Tread Width - Front, Wide-Stance Tires 37.5 in (950 mm)
Tread Width - Rear, Standard Tires 35 in (890 mm)
Ground Clearance - At Lowest Point of Mast 3.1 in (80 mm)
Ground Clearance - At Center of Wheelbase 5.4 in (139 mm)
Brakes - Service Foot - Hydraulic
Brakes - Parking Hand - Mechanical
POWER TRAIN
Engine - Model K25
Engine - Continuous Output (S.A.E. Gross) 60 HP (45 kW)
Engine - Continuous Output (S.A.E. Gross) at rpm 2700
Engine - Maximum Torque (S.A.E. Gross) 136 lb-ft (185 Nm/rpm)
Engine - Maximum Torque (S.A.E. Gross) at rpm 1600
Engine - Cylinder Displacement 152 cu in (2.5 L)
Transmission - Type Powershift
Transmission - Number of Speeds Forward / Reverse 1 / 1
Battery 12 volts
HYDRAULICS
Relief Pressure - For Attachments at Auxiliary Value 2250 psi (158 kg/cm2)
Hydraulic Flow - For Attachments at Auxiliary Value 23.5 gpm (89.1 lpm)

Caterpillar 5K Industrial Dimensions Images and text provided by
Caterpillar

 

CAT 8K (Industrial)

Caterpillar 5K Industrial

S P E C I F I C A T I O N S
CHARACTERISTICS
Capacity at Rated Load Center 8000 lbs (4000 kg)
Capacity at Load Center-Distance 24 in (500 mm)
Power Gasoline / LP Gas
Tire Type Pneumatic / Pneumatic
Wheels (x = driven) Number, Front / Rear 2x / 2
DIMENSIONS
Lift - Maximum Fork Height with Rated Load 198 in (5050 mm)
Lift with Standard Two-Stage Mast - Maximum Fork Height 131 in (3350 mm)
Lift with Standard Two-Stage Mast - Free Fork Height 5.9 in (150 mm)
Forks - Thickness x Length x Width 2 in x 48 in x 5.9 in (50 mm x 1220 mm x 150 mm)
Fork Spacing - Out-To-Out Minimum / Maximum 12.6 in / 46.6 in (320 mm / 1184 mm)
Tilt - Forward / Backward 6 degrees / 10 degrees
Length to Fork Face

121 in (3070 mm)
Width - with Standard Tires 55.5 in (1415 mm)
Width - with Lowered Mast 91.5 in (2320 mm)
Height - Seat Height 43 in (1093 mm)
Height - To Top of Overhead Guard 88.5 in (2250 mm)
Height - With Extended Mast 180 in (4570 mm)
Minimum Outside Turning Radius 108 in (2735 mm)
Load Moment Constant 21.9 in (557 mm)
Minimum Aisle - 90 Degree Stack - Zero Clearance without Load 129.9 in (3292 mm)
PERFORMANCE
Speeds - Travel Speed Loaded / Empty 11 mph / 12 mph (17.5 km/h / 19.5 km/h)
Speeds - Lift Speed Loaded / Empty 100 fpm / 100 fpm (510 mm/s / 510 mm/s)
Speeds - Lowering Speed Loaded / Empty 98 fpm / 98 fpm (500 mm/s / 500 mm/s)
Drawbar Pull - Loaded at 1 mph (1.6 km) 5575 lbs (24,800 N)
Drawbar Pull - Loaded Maximum 6475 lbs (28,800 N)
Gradeability - Loaded at 1 mph (1.6 km) 29.3 %
Gradeability - Maximum Loaded / Empty 34.9% / 27.4%
WEIGHT
Empty 12,300 lbs (5580 kg)
Axle Load - With Rated Load Front / Rear 18,100 lbs / 2,200 lbs (8210 kg / 995 kg)
Axle Load - Without Load Front / Rear 5450 lbs / 6850 lbs (2470 kg / 310 kg)
CHASSIS
Tire Size - Front, Standard 8.25 in x 15-14 PR
Tire Size - Rear 7.00 in x 12-12 PR
Wheelbase 78.5 in (2000 mm)
Tread Width - Front, Standard Tires 46.5 in (1180 mm)
Tread Width - Rear Tires 46.5 in (1180 mm)
Ground Clearance - At Lowest Point of Mast 5.9 in (150 mm)
Ground Clearance - At Center of Wheelbase 9.9 in (250 mm)
Brakes - Service Hydraulic with vacuum boost
Brakes - Parking Hand - Mechanical
POWER TRAIN
Engine - Model TB45
Engine - Continuous Output (S.A.E. Gross) 96.5 HP (71.8 kW)
Engine - Continuous Output (S.A.E. Gross) at rpm 2450
Engine - Maximum Torque (S.A.E. Gross) 207 lb-ft (28.6 Nm/rpm)
Engine - Maximum Torque (S.A.E. Gross) at rpm 1200
Engine - Cylinder Displacement 6 cu in (275 cm3)
Transmission - Type Powershift
Transmission - Number of Speeds Forward / Reverse 1 / 1
Relief Pressure - For Attachments 2775 psi (190 bar)
Noise Level - Mean Value at Operator's Ear Leq 85.5 dB(A)

Caterpillar 5K Industrial Dimensions Images and text provided by
Caterpillar

 

Accessories

2" or 2-5/16" attachment for moving trailers is available.

Hertz Information: hes@hertz.com